Hose Crimping Mahcine
1. Features At a Glance
※High pressure and durable, this model’s intensity is increased 15T than similar products, At the time of operation, it is in the state of relax, like as big horse pull pony. Do not overload the motor and hydraulic pump, As a result, the overall life of the crimping machine is extended.
※Zero taper, the section of fitting and ferrule is same after withhold, no taper. ( if finished the withhold, hydraulic fitting and ferrule’s front is bigger than rear 3mm,its’ life will reduce about 30% than zero taper, and so on.)
※Short cylinder stroke、large central aperture、Shape extension elbow through the strong.
※Low noise、multifunction、make a mold faster、easy to operate、good maintenance ,etc.
2 Withholding operation
※check to be certain that machine is good and make the machine crimping without hose fittings for 20 to 30 times when first time use.
※In winter, pls make the machine crimping without hose fittings for 20 to 30 times so as to increase the oil temperature.
※Press the open die button, then according to the O.D, choose the correct die after the master die open, and adjust the micrometer scale.
※Assemble the fittings and hose, the whole sleeve is covered by the crimping die one time.
※Choose the auto and press the open die button, until the pressure tube head stops depressing and automatically opens the mold.
Amount of die